Flytec Windwatch Pro - Manual (Page 14)

14 Stop Watch and Timer
Stopwatch and Timer
Stopwatch and Timer Screens
The WWP features a full-function stopwatch with 1/10th second accuracy, a countdown timer
and a sailing/race timer. Both timers feature a pre-alarm warning that can be user set. The pre-
alarm for the racing timer was designed for regatta starts in sailing. If a pre-alarm is set, the
WWP will beep for 3 seconds at the pre-set interval before the end of the timer period.
Stopwatch
On this screen the top line shows the running time in minutes,
seconds and tenths of a second. The middle line shows the
new interval (lap) time and the bottom line presents the
previous interval time.
15:28.2
13:23.4
8:15.5
Short-press to start and stop stopwatch
Short-press to record interval (lap) time while the
stopwatch is running
A long press resets the stopwatch back to 0.0.
The lap times are maintained.
A long press resets the stopwatch and interval
times to 0.0.
Timer
15:00
13:25
3:00
The top line shows the user-set timer period, the second line
shows the remaining countdown time, and the bottom line
shows the period of time that the pre-alarm will sound in
advance of the timer alarm (countdown time=0). The timer is
started and stopped with the
X key.
A long press of the RES key sets the countdown time (middle
line) back to the timer setting as shown on the top line of the
screen. When the countdown timer reaches the pre-alarm
value, the WWP will beep for 3 seconds. When the countdown
time reaches 0, a final alarm sounds and will continue until
any key is pressed