Summary of functions, Operating philosophy, Change main function – Flytec Windwatch Pro User Manual

Page 4: Change sub function, Backlight, Summary of functions operating philosophy

Advertising
background image

4

Introduction

Congratulations!
on your purchase of the pocket weather station Windwatch PRO

This operation manual provides detailed information about the operating mode of the
Windwatch PRO

instrument. By using your new, multi function instrument which is equipped

with four high precision sensors, you are able to measure wind, air pressure, altitude,
temperature and relative air humidity. Moreover, your pocket weather station provides the
feature of Windchill and dew point calculation, as well as very useful functions for timer, alarm
and alarm clock. The purpose of this operating manual is to make yourself familiar with the easy
handling of the instrument and to stimulate at the same time the comprehension for
meteorological correlation. Some more comments related to meteorology-physical conditions
are specifically addressed to the ambitious user.

Summary of Functions

The Windwatch PRO provides the following six main function screens, shown with
corresponding symbols that are visible in the upper part of the display:






Sub

function

Wind Gauge

Sub

function

Sub

function

Stop Watch

Timer

Time

Alarm Clock

Sub

function

Barometer

Altimeter

Humidity

Temperature

Sub

function

Sub

function

Within any main function screen it is possible to access one or two sub-screens

Operating Philosophy

Change Main function:

A short press of the MENU key scrolls, in a loop, from one main screen to the next main
screen (see page 6 chart of functions).

Change Sub function:

A short press of the SUB key scrolls through the possible sub-screens within each main
screen.


2

Backlight

Long-press

the MENU key for 2 seconds to activate the display backlight. The backlight

consumes higher-than-normal battery power; therefore it is recommended that it only be used
when the display could otherwise not be read. When the battery condition is weak, the backlight
function is automatically disabled and a “No Li” message is briefly shown in the display upon the
next menu change. All other functions of the instrument remain operative until the battery is
completely exhausted.

Advertising