Flytec Windwatch Pro - Manual (Page 15)

Stop Watch and Timer 15
1:00:00
56:18
10:00
Race/Sail timer for regatta start
The race timer is differentiated from the normal countdown
timer by a sailboat icon in the top of the display. When the race
timer is selected, the WWP will beep once per second during
the last 5 seconds of the countdown period, followed by a
longer beep when the countdown reaches 0. The pre-alarm still
functions for the race timer in the same way as for the standard
timer.
Timer Settings
The settings for the standard timer and the race timer are the same.
Setting the timer
4
SEC
With either the bell or sailboat icon showing in the top of the
display, press the MENU key for 4 seconds to set the timer
period. The hour field will blink first and can be set with the▼
and ▲ keys; short-press the MENU key to accept and advance
to the minutes field, then set the minutes and short-press the
MENU key to accept and advance to the seconds field. Set the
desired value and short-press the MENU key to return to the
run mode. The maximum timer setting is 99 hours, 59 minutes
and 59 seconds. The timer is started with a short press of the
X
key, which is also the stop key.
0:15:00
4
SEC
Setting the pre-alarm
The WWP must be in the Timer screen (bell or sailboat icon in
the top of display). Press the SUB key for 4 seconds, then set
the pre-alarm period in the same way as the timer period
(above). The maximum time for the pre-alarm is 99 hours, 59
minutes and 59 seconds and the minimum time is 10 seconds.
A setting of 0:00 deactivates the pre-alarm.
3:00