AEG COMPETENCE B8920-1 - Manual (Page 23)

23
Additional Functions
Baking and Roasting Programmes
3
For this function, use the recipes supplied in the chapter “Usage, Tables
and Tips”.
Selecting baking and roasting programmes
1. Press the Programme button as
often as necessary, until the desired
baking/roasting programme
appears.
– In the function display field the
symbols for the oven function
and the recommended oven
shelf appear.
– The suggested temperature ap-
pears on the temperature dis-
play.
– The cooking time and the end time appear in the clock display.
– After about 5 seconds, the oven is switched on.
– Before the programme ends, an audible signal sounds.
2. Check the cooking at this point.
– When the cooking time is completed, an audible signal sounds.
”0:00” flashes in the clock display.
3. The signal can be stopped by pressing any button.
Delaying the start
The cooking time can be delayed (see Clock
Functions End Time).
3
The clock function End Time can be set, if the programme has been
running for less than two minutes.
Ending the cooking time early
Press the Programme
button as often as necessary until no baking/
roasting programme is displayed.