Inserting the batteries (aaa x 2), Using the touchpad, Changing channels by entering numbers – Samsung UE40F6400AK User Manual

Page 6

Advertising
background image

English - 6

Battery Low Alarm

If the battery becomes and blanks low while using the Smart Touch Control, the following alarm window
blinks and appears at the bottom left of the screen. If the alarm window pops up, replace the batteries of the
Smart Touch Control. Use alkaline batteries for longer usage.

Inserting the Batteries (AAA X 2)

1

2

3

1. Slightly lift the battery cover using a plastic card. Next, pull on the cover’s notch with a fingernail to remove the cover

completely.

Check the location of the battery cover groove. The groove's location may vary depending on the type of
Smart Touch Control is provided with the product.

2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
3. Align the battery cover with the back of the remote control and press down along the edges until it is cleanly

attached to the remote control.

Using the touchpad

Use the touchpad to perform various commands. Navigate to Tutorial (Screen Menu > System > Device Manager >
Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.

Dragging

Press

Drag on the touchpad in the desired direction.

Move the focus or the pointer in the direction the finger is dragging.

Press the touchpad. This selects the focused item.

Changing Channels by Entering Numbers

While watching TV, tap on the protruding line on the left or right edge of the touchpad
to bring up the numerical input window on the screen. Use your finger to enter the
number for the channel you want to watch. The recognised number is displayed on
the screen and the TV switches to the corresponding channel. However, the number
you have entered may not be recognised properly by the TV. Refer to the guide below
to ensure that your numerical entries are recognised accurately.

Numerical Input Guide

Refer to the diagrams below when entering numerical values. The TV may not recognise your entries if you do not
follow the sequences shown below.

[UE6400-XH]BN68-04778D-05L16.indb 6

2013-11-14 2:57:29

Advertising
This manual is related to the following products: