Client side node parameters, Client side map descriptor parameters, Fieldserver specific map descriptor parameters – Sierra Monitor Company FS-8700-48 User Manual

Page 11

Advertising
background image

FS-8700-48 Fike Cheetah Manual

Page 12 of 37

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]

5.2

Client Side Node Parameters

Section Title
Nodes
Column Title

Function

Legal Values

Node_Name

Provide name for node

Up to 32 alphanumeric characters

Protocol

Specify protocol used

Cheetah

Port

Specify which port the device is connected to the
FieldServer

P1-P8, R1-R2

3

PLC_Type*

This parameter tells the driver what type of panel
you are connecting to. If not specified, the driver
expects a legacy Cheetah panel.

Cybercat , Cheetah


Example

// Client Side Nodes

Nodes

Node_Name

, Protocol , Port , PLC_Type

Cheet_Master1 , Cheetah , P1

, Cheetah





5.3

Client Side Map Descriptor Parameters

5.3.1 FieldServer Specific Map Descriptor Parameters

Column Title

Function

Legal Values

Map_Descriptor_Name Name of this Map Descriptor

Up to 32 alphanumeric characters

Data_Array_Name

Name of Data Array where data is to be
stored in the FieldServer

One of the Data Array names from
Section 4.

Data_Array_Offset

Starting location in Data Array

0 to (Data_Array_Length-1) as specified
in Section 4.

Function

Function of Client Map Descriptor

Passive

Node_Name

Provide name for Node

Up to 32 alphanumeric characters

3

Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available

on specific hardware.

Set PLC_Type to Cybercat
for Xi Panels

Advertising