Sierra Monitor Company FS-8700-48 - Manual (Page 29)

FS-8700-48 Fike Cheetah Manual Page 30 of 37
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
Array Location Data Category Data stored at this location
25 Day of Month
26 Year
27 Day of Week
28 Hour
29 AM/PM
30 Minute
31 Second
32 Current Event Counter Number of current events present on cheetah
33 LED Status Indicators Pre-Alarm
34 Fire Alarm
35 Supervisory Alarm
36 Trouble
37 AC Power
38 Alarm Silence
39 Supervisory Silence
40 Trouble Silence
Appendix D.4. How History Events are Stored
History events records are send by the panel each time an event occurs. The driver can parse these messages and
store the data in either of two ways.
The event code is stored at an array location that is based on the device address and loop number. See
Section 5.4.13
Additional event data is stored in a secondary Data Array. See Section 5.4.14
The array locations of the additional data are indicated below
Location Contents Notes
0 Month
1 Day of Month
2 Year less 1900
3 Day of Week (1..7)
4 Hour (0-12)
5 AM-PM (A,P)
6 Minute
7 Second
8 Event Data (0-65535)
9 Custom Message 20 bytes
29 Fire Point
30 Zero Point
31 Device Type
32 Device Function
33 Zones device belongs to 32 bytes. Bit 0 -> Zone1 …. Bit 17->zone 18 …
65 Current History Counter (0-65535)