Sierra Monitor Company FS-8700-48 - Manual (Page 8)

FS-8700-48 Fike Cheetah Manual Page 9 of 37
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
3.4 Connecting the FieldServer to the MIM (Multi -Interface Module)
The RS-232 port of the FieldServer connects to the P5 (RJ11) RS-232 port of the MIM board.
RJ45 Connector
MIM
Terminal
Block
FS-8917-16
P5
Pinouts
FieldServer
P1
1 8
RS-232 Port
RJ11
MIM
Black wire RX pin 2
Green wire TX pin 4
Yellow wire GND pin 5 RJ45
FieldServer
Orange/White wire TX pin 8
Brown wire RX pin 1
Blue/White wire GND pin 4
3.4.1 Connection Notes
The Peripherals menu of the Fike Panel needs to be updated:
Hit ‘ESC’ until “Top Level Menu” is on the screen
Hit ‘F1’ for “Config”
Hit ‘F6’ for “Menu 2”
Hit ‘F6’ for “Menu 3”
Hit ‘F1’ for “Periph”
Hit ‘F1’ for “Device”
Choose address of MIM
Set “Type” to “Computer”
Set “Supervise” to “No”