AT&T DECT EL52459 - Manual (Page 22)

Handset settings
17
Answering system settings
Remote access code
To access your answering system remotely from any touch tone phone, you
need to enter a two-digit number (10-99). Unless you change it, the remote
access code is 19.
To change the remote access code:
1. When the handset is in idle mode, press
MENU/
SELECT
to
enter the main menu.
2. Press
MENU
/SELECT again.
3. Press q CID or DIRp to scroll to >ANS SYS SETUP, then
press
MENU
/SELECT.
4. Press
MENU
/SELECT to scroll to >REMOTE CODE, then press
MENU
/SELECT.
5. Press q CID or DIRp to change the remote access code. to change the remote access code.
6. Press
MENU
/SELECT to confirm your setting. A confirmation
tone sounds.
>ANS. SYSTEM
DIRECTORY
>ANS SYS SETUP
PLAY MSGS
>REMOTE CODE
MSG ALERT TONE
REMOTE CODE
19