AT&T DECT EL52459 - Manual (Page 24)

19
Making, answering, and ending calls
Making a call
To make a call, press
PHONE/
FLASH
or SPEAKER, then enter the
telephone number.
The screen displays the elapsed time as you talk (in
hours, minutes and seconds).
NOTE: Press
PHONE
/FLASH to access services from your local
telephone company does not affect the elapsed time.
On-hook dialing (predialing)
Enter the telephone number, then press
PHONE/
FLASH
or SPEAKER to
dial. Press
MUTE
/DELETE or
OFF
/CLEAR at any time to make corrections as
you are entering numbers.
Answering a call
To answer a call:
• Press
PHONE/
FLASH
or SPEAKER.
–OR–
• Press any dial pad key (0-9, * or #).
Temporary ringer silencing
Press
OFF/
CLEAR
or
DELETE
/MUTE while the telephone is ringing to silence
the ringer temporarily on that handset only. This turns off the ringer without
disconnecting the call. The next incoming call rings normally at the preset
volume.
NOTE: Each handset rings when there is an incoming call unless the ringer volume is
turned off on that handset.
Ending a call
To end a call, press the
OFF/
CLEAR
or return the handset in the telephone
base or charger.
Auto off
A call ends automatically when you put the handset in the telephone base
or charger.
PHONE 0:00:30
Elapsed
time
Telephone operation