Handset operation, Speakerphone information last number redial – AT&T DECT EL52459 User Manual

Page 25

Advertising
background image

Telephone operation

20

Handset operation

Speakerphone information
During a call, press

SPEAKER to switch between hands-free speakerphone

and normal handset use. Press

OFF/

CLEAR

to hang up.

NOTES:
1. If you use the speakerphone during

LOW BATTERY mode, the

handset is not lit except for the

SPEAKER button.

2. The speakerphone uses more power than the normal handset.

If the handset battery becomes very low while you are using
the speakerphone, the call remains in speakerphone mode
until you hang up or the battery becomes depleted. When
the battery is very low, you cannot switch a call from normal
handset use to speakerphone mode.

3. After installing the battery into the handset, the screen may

show

LOW BATTERY. If you use speakerphone at this time,

the battery may become depleted. Follow the instructions in
the

Battery installation & charging section on pages 5-6.

Last number redial
To view the recently dialed numbers:
• To display the most recently called number (up to 30 digits),

press

REDIAL/

PAUSE

.

• To view up to five recently called numbers, press

REDIAL/

PAUSE

then press qCID or DIRp, or press

REDIAL/

PAUSE

repeatedly.

The handset beeps twice at the beginning and at the end of the list.
Press

OFF/

CLEAR

to exit.

To redial a number:
• To dial the displayed number, press

PHONE/

FLASH

or SPEAKER.

-OR-

• You can call the most recently called number by pressing

PHONE/

FLASH

or

SPEAKER, then pressing REDIAL/

PAUSE

.

While reviewing the redial memory, press

MUTE

/DELETE to delete the

displayed number.

PHONE 0:00:30

Elapsed

time

REDIAL

888-883-2445

Advertising