AT&T DECT EL52459 - Manual (Page 23)

Handset settings
18
Answering system settings
Message alert tone
When the message alert tone is set to
ON, and there is at least one new
message, the telephone base beeps every 10 seconds. Unless you change it,
the message alert tone is set to off.
To change the setting:
1. When the handset is in idle mode, press
MENU/
SELECT
to
enter the main menu.
2. Press
MENU
/SELECT again.
3. Press q CID or DIRp to scroll to >ANS SYS SETUP, then
press
MENU
/SELECT.
4. Press q CID or DIRp to scroll to >MSG ALERT TONE, then
press
MENU
/SELECT.
5. Press q CID or DIRp to choose between ON and OFF.
6. Press
MENU
/SELECT to confirm your setting. A confirmation
tone sounds.
NOTES:
1. The message alert tone beeps only if all the conditions below are met:
- Answering system is on.
- Message alert tone setting is on.
- There are new messages.
2. To temporarily turn off the message alert tone, see page 38.
>ANS. SYSTEM
DIRECTORY
>ANS SYS SETUP
PLAY MSGS
>MSG ALERT TONE
ANSWER ON/OFF
MSG ALERT TONE
ON