AT&T DECT EL52459 - Manual (Page 28)

23
Multiple handset use
Handset locator
The handset locator feature is useful if you misplace
any handsets.
To start the paging tone:
Press
HANDSET LOCATOR at the telephone base
to start the paging tone on all handsets for 60
seconds.
NOTE: if you press OFF/
CLEAR
or MUTE/
DELETE
on a
handset, the ringer of the handset is silenced but the paging
tone continues.
To stop the paging tone:
• Press
PHONE/FLASH, SPEAKER
,
or any dial
pad key (0-9, *, or #) on the handset(s),
–OR–
• Press
HANDSET LOCATOR on the telephone base.
NOTE: The handset ringer volume also determines the level of the
paging tone. If the handset ringer volume level is set to off, that
handset is silent for all calls and paging (page 9).
Join a call in progress
You can conference with another system handset while on a call. If a handset
is already on a call and you would like to join the call, press
PHONE/
FLASH
or SPEAKER on another system handset.
Press OFF/
CLEAR
or place the handset in the telephone base or charger to
exit the call. The call is terminated once all handsets hang up.
NOTE: You can only use two system handsets at the same time on an outside call.
**PAGING**
Multiple handset use