AMT Datasouth documax 3300 - Manual (Page 81)

User’s Guide
Features and Profiles 4-5
The Value keys are used to change the value of a feature. Pressing the
Value ▲ key increases feature values. Pressing the Value ▼ key decreases
feature values.
The Next Menu key provides access to a specific group of features. Pressing
this key steps through the printer features by menu. This prevents having to
“cycle through” the entire list using the Feature key in order to get to the
desired feature.
This key provides immediate access to typical features required for quick
setup. These include font, margins, form length, and lines/inch. The features
accessed by this key can be changed to correspond to the user’s needs.
The Feature keys are used to select a specific feature. Press the Feature ▲
key will move the display up the features list. Pressing the Feature ▼ key
will move the display down the features list. When a menu boundary is
crossed in either direction, it will be displayed.
The Enter key is used to accept new values for printer features. After the
value of a feature has been changed, the Enter key is pressed to save the new
settings into memory.
This key enables the user to adjust the top-of-form setting (first printline
location) using the Value ▲ ▼ keys.