AMT Datasouth documax 3300 - Manual (Page 95)

User’s Guide
Features and Profiles 4-19
Menu 4: Printer Control
Printer Displays Values Description
Auto LF xxx Disable
Enable
No line feed with carriage return.
Performs a line feed with carriage return.
Auto CR xxx Disable
Enable
No carriage return with line feed.
Performs a carriage return with line feed.
Wrap xxx
Disable
Enable
Printable data past the right margin is ignored.
Performs a carriage return line feed if data
exceeds the right margin.
Print xxxxxxxx
Bidirect
Unidirect
Bi-Directional printing
Unidirectional printing prints left-to-right only.
Auto Path SW xx ON
OFF
When this feature is set to ‘ON’ and a paper
out occurs while printing, the printer will
automatically change to the other paper
path and continue printing if the forms are
loaded successfully.
This feature is valid only on dual tractor units.
Vert Graphic xxx ON
OFF
Specifies status of the TI-885 raster graphics
mode
When ON Anadex graphics is enabled when
DS-180 Emulation is selected.
Horz Graphic xxx ON
OFF
Specifies status of the TI-885 horizontal
graphic mode
Power Up xxxxxxxx On Line
Off Line
Specifies whether printer powers up into on
line or off line status