AMT Datasouth documax 3300 - Manual (Page 97)

User’s Guide
Features and Profiles 4-21
Menu 4: Printer Control (Cont’d)
Printer Displays Values Description
DGCL xxxxxxx Disable
Enable
Disables recognition of Barcode Transparency
commands
Enable recognition of Barcode Transparency
Commands
Exit Mode xxxxxx Adjust
Return
No Adj
BC-300
Adjust the form to the next logical line feed
boundary upon exiting the Barcode Task
mode.
Return the form to the last active vertical
position upon exiting the Barcode Task
mode. See the ^J000 command
Position the form directly below the last
printable pass of the Task mode upon
exiting the Task mode
Emulates the Barcode 300 exit mode.
Command Char xxx 33
255
Defines the default command character
Example: 94 represents the [^] character
Overlap xxxxxxx Disable
Enable
Disables one dot overlap when printing
barcodes
Enables one dot overlap when printing
barcodes
DW Term Disable
Enable
Double wide print is not affected by line
terminations
Double wide print is cancelled by CR, LF, FF,
and VT
Valid only when DS-180 Emulation is
selected.
See Chapter 6 in Programmer’s Manual for barcode programming.