Figure 43: tightening the rack mount screws – Allied Telesis AT-SBx31CFC960 User Manual
Page 101
Advertising
SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
101
5. Tighten all six screws shown in Figure 43 to secure the chassis to the
equipment rack. Allied Telesis recommends tightening the screws to
10 inch-lbs.
Figure 43. Tightening the Rack Mount Screws
6. Go to “Removing the Shipping Brace” on page 102.
Screws
Screws
Advertising
This manual is related to the following products: