Allied Telesis AT-SBx31CFC960 - Manual (Page 157)

SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
157
Figure 100. Attaching a Fiber Optic Cable to an SFP+ Transceiver in the
AT-SBx31XS6 Line Card
6. Repeat this procedure to install additional SFP plus transceivers in the
AT-SBx31XS6 Line Cards.
After installing and cabling the SFP+ transceivers, do one of the following:
 To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
 After cabling all the ports in the chassis, go to Chapter 9,
“Powering On the Chassis” on page 171.