Allied Telesis AT-SBx31CFC960 - Manual (Page 156)

Chapter 8: Installing the Transceivers and Cabling the Ports
156
Figure 99. Removing the Dust Cover from an SFP+ Transceiver in the AT-
SBx31XS6 Line Card
Note
The dust cover protects the fiber optic port on the SFP transceiver
from dust contamination. It should not be removed until you are
ready to connect the fiber optic cable.
5. Connect the fiber optic cable to the port on the transceiver, as shown
in Figure 100 on page 157. The connector should snap into the port.