Allied Telesis AT-SBx31CFC960 User Manual
Page 169
Advertising
SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
169
6. Repeat this procedure to install additional SFP or SFP+ transceivers in
the AT-SBx31CFC960 Controller Card.
After installing and cabling the transceivers, do one of the following:
To install and cable additional transceivers, go to the appropriate
section in this chapter for instructions.
After cabling all the ports in the chassis, go to Chapter 9,
“Powering On the Chassis” on page 171.
Advertising
This manual is related to the following products: