Allied Telesis AT-SBx31CFC960 - Manual (Page 161)

SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
161
Figure 104. Handle on the XFP Transceiver
4. Slide the transceiver into the slot until it clicks into place, as shown in
Figure 105.
Figure 105. Installing an XFP Transceiver in the AT-SBx31XZ4 Line Card
Note
If you are ready to attach the fiber optic cable to the transceiver,
continue with the next step. Otherwise, repeat steps 1 to 4 to install
the remaining XFP transceivers.
5. Remove the protective cover from the fiber optic port on the XFP
transceiver, as shown in Figure 106 on page 162.
Handle