Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 111)

Ethernet Configuration Commands
Page 110
Example
The following example displays the configuration of all configured interfaces:
show interfaces status
The show interfaces status Privileged EXEC mode command displays the status of all configured interfaces.
Syntax
show interfaces status [ethernet interface| port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
console# show interfaces configuration
Port Type Duplex Speed Neg Flow
Ctrl
Link
State
Back
Pressure
Mdix
Mode
---- ----------- ------ ----- ------- ---- ----- -------- ----
e1 100M-Copper Full 100 Enabled Off Up Disabled Auto
e2 100M-Copper Full 100 Enabled Off Up Disabled Auto
e3 100M-Copper Full 100 Enabled Off Up Disabled Auto
e4 100M-Copper Full 100 Enabled Off Up Disabled Auto
e5 100M-Copper Full 100 Enabled Off Up Disabled Auto
e6 100M-Copper Full 100 Enabled Off Up Disabled Auto
e7 100M-Copper Full 100 Enabled Off Up Disabled Auto
e8 100M-Copper Full 100 Enabled Off Up Disabled Auto
e9 100M-Copper Full 100 Enabled Off Up Disabled Auto
e10 100M-Copper Full 100 Enabled Off Up Disabled Auto
e11 100M-Copper Full 100 Enabled Off Up Disabled Auto
e12 100M-Copper Full 100 Enabled Off Up Disabled Auto
e13 100M-Copper Full 100 Enabled Off Up Disabled Auto
e14 100M-Copper Full 100 Enabled Off Up Disabled Auto
e15 100M-Copper Full 100 Enabled Off Up Disabled Auto
e16 100M-Copper Full 100 Enabled Off Up Disabled Auto
e17 100M-Copper Full 100 Enabled Off Up Disabled Auto
e18 100M-Copper Full 100 Enabled Off Up Disabled Auto
e19 100M-Copper Full 100 Enabled Off Up Disabled Auto