Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 68)

Page 67
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Syntax
show bridge multicast filtering vlan-id
Parameters
•
vlan-id — VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the Multicast configuration for VLAN 1.
console# show bridge multicast filtering 1
Filtering:
Enabled
VLAN: 1
Forward-All
Port Static Status
---- --------- ---------
1/e1 - Filter
1/e2 - Filter
1/e3 - Filter
1/e4 - Filter
1/e5 - Filter
1/e6 - Filter
1/e7 - Filter
1/e8 - Filter
1/e9 - Filter
1/e10 - Filter
1/e11 - Filter
1/e12 - Filter