Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 331)

System Management Commands
Page 330
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about the active users.
show sessions
The show sessions User EXEC mode command lists open Telnet sessions.
Syntax
show sessions
Parameters
This command has no arguments or keywords.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Console show users
Username Protocol Location
---------- ----------- ------------
manager Serial 0.0.0
Admin HTTP 192.168.1.960.
Bob Telnet 192.168.1.120
bill Telnet 192.168.1.101
console#