Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 261)

SNMP Commands
Page 260
Example
The following example displays the configuration of filters.
show snmp users
The show snmp users Privileged EXEC mode command displays the configuration of users.
Syntax
show snmp users [username]
Parameters
•
username — Specifies the name of the user. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of users.
console# show snmp filters
Name OID Tree Type
----------- ----------------------- ---------
user-filter 1.3.6.1.2.1.1 Included
user-filter 1.3.6.1.2.1.1.7 Excluded
user-filter 1.3.6.1.2.1.2.2.1.*.1 Included
console# show snmp users
Name Group name Auth Method Remote
------ ------------ --------- -------------------------
John user-group md5
John user-group md5 08009009020C0B099C075879