Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 339)

User Interface Commands
Page 338
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enters Global Configuration mode.
exit (Configuration)
The exit command exits any configuration mode to the next highest mode in the CLI mode hierarchy.
Syntax
exit
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
All configuration modes
User Guidelines
There are no user guidelines for this command.
Example
The following example changes the configuration mode from Interface Configuration mode to Privileged EXEC
mode.
exit
The exit Privileged/User EXEC mode command closes an active terminal session by logging off the device.
Syntax
exit
console# configure
console(config)#
console(config-if)# exit
console(config)# exit
console#