Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 326)

Page 325
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
resume
Syntax
resume [connection]
Default Configuration
The default connection number is that of the most recent connection.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following command switches to open Telnet session number 1.
hostname
The hostname Global Configuration mode command specifies or modifies the device host name. Use the no form
of this command to remove the existing host name.
Syntax
hostname name
no hostname
Parameters
•
name — The host name. of the device. (Range: 1-158 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
console> resume 1