Allied Telesis AlliedView-EMS 4.0.2 VLAN-Manager - Manual (Page 18)

AlliedView™-EMS 4.0.2 VLAN MANAGER USER’S GUIDE Page 18 of 77
SNMP
Version
This drop down list allows you to select the SNMP version to use in managing
the target device.
Note - Before choosing "v2c" or "v3", make sure that the target device you are
connecting to supports SNMP v2c and/or SNMP v3 respectively.
Settings
If the Version is set to "v1" or "v2c", this button opens the SNMP v1/v2c Settings
window. Otherwise, if the Version is set to "v3", this button opens the SNMP v3
Settings window.
SNMP v1/v2c Settings dialog box
Community Name
The community strings to use in performing SNMP operations on the target host.
There are two types of community strings for SNMP. Be sure to specify strings
which match the ones configured on the target host.
By default, the following strings are used:
for the 'Get' operation
public
for the 'Set' operation
private