Allied Telesis AlliedView-EMS 4.0.2 VLAN-Manager - Manual (Page 62)

AlliedView™-EMS 4.0.2 VLAN MANAGER USER’S GUIDE Page 62 of 77
Input Field Valid Values Length
Identifier (cannot be modified) - 2 - 4094 -
Advertisement (cannot be modified if VLAN Type is Protocol)
- Enabled
- Disabled
-
6.13.3 Notes
•
The XFP slots on the device image will always show XFP images regardless of
whether or not XFP transceivers are physically present in the slots.
•
The current firmware version allows a maximum of 32 characters for the VLAN
Name parameter. When adding ports 1 and/or 2 as tagged/untagged ports of a
VLAN whose name is of length 32, an additional character is appended to the name
thereby causing the name to exceed 32 characters. When this happens, problems
may be encountered while attempting to modify or delete this VLAN.
•
The current firmware version allows you to pre-configure switches that may be
added to the stack in the future. Pre-configured switches are identified by a “Non-
Existing” label that appears above the device panel in the Add VLAN and Modify
VLAN dialog boxes. Ports on pre-configured switches can be included in a VLAN
but only those marked as “untagged” or “forbidden” will appear on the VLAN
Information Window. Ports marked as “tagged” will not appear. They will appear
only when a physical switch, whose box id matches the box id of the pre-configured
switch to which the tagged ports belong, is added to the stack.
•
Deleting a VLAN containing untagged port members that are Forbidden member
ports of the Default VLAN will result in the error message “Command: delete vlan
<vlan name> Fail!” However, performing a Refresh operation will show that the
VLAN was successfully removed.
6 Device Support