Allied Telesis AlliedView-EMS 4.0.2 VLAN-Manager - Manual (Page 23)

AlliedView™-EMS 4.0.2 VLAN MANAGER USER’S GUIDE Page 23 of 77
Adding/Removing Ports
In the illustration above, a new VLAN definition is being created for a Rapier 24i. The VLAN
Name
is "test" while its Identifier is "3". Ports 2 to 6 are untagged members while Port 1
is a tagged member of the VLAN.
5.2.1.3 OK Button
The OK Button is disabled by default. It is only enabled when both the Name and Identifier
fields are populated. When the OK button is clicked, VLAN Manager adds the new VLAN
definition to the target host and updates the VLAN Information Window.