Allied Telesis AlliedView-EMS 4.0.2 VLAN-Manager User Manual
Page 68
AlliedView™-EMS 4.0.2 VLAN MANAGER USER’S GUIDE
Page 68 of 77
6.16.3 Notes
•
VLAN Manager does not display the tagged ports set in the Default VLAN if the
port is not a member of another VLAN. Port must be in Untagged state in other
VLAN in order to set it to Tagged state in the default VLAN.
•
It may take a while for VLAN Manager to retrieve or save VLAN information
from/to the device if the device is in stacked mode.
•
VLAN Manager may intermittently fail to access the device even if the device is up.
•
Port must be in Untagged state in other VLAN in order to remove it from the
default VLAN. If a port is not Untagged in other VLAN, user would not be able
to remove it from the default VLAN.
•
The current firmware version will allow VLAN Manager to retrieve the device
VLAN information using an SNMPv3 account that has no read access configuration.
6 Device Support