Allied Telesis AlliedView-EMS 4.0.2 VLAN-Manager - Manual (Page 34)

AlliedView™-EMS 4.0.2 VLAN MANAGER USER’S GUIDE Page 34 of 77
Input Field Valid Values Length
Identifier (cannot be
modified)
1 - 4094 -
Mirror Port
0-65535
Note - The default value of 0 indicates that
there is no port mirror defined for this VLAN.
-
6.1.3 Notes
•
An uplink port must be specified to change the VLAN Mode to "Multiple VLAN"
or to "802.1Q Multiple VLAN". Specifying an incorrect port as the uplink port will
cause VLAN Manager to lose connection with the device without any warning.
Exercise caution.
6 Device Support