Allied Telesis AlliedView-EMS 4.0.2 VLAN-Manager User Manual
Page 39
Advertising
AlliedView™-EMS 4.0.2 VLAN MANAGER USER’S GUIDE
Page 39 of 77
•
The current firmware version allows you to pre-configure switches that may be
added to the stack in the future. Pre-configured switches are identified by a "Non-
Existing" label that appears above the device panel in the Add VLAN and Modify
VLAN dialog boxes. Ports on pre-configured switches can be included in a VLAN
provided they are not members of a port channel. Any attempt to associate a pre-
configured switch port that is a member of a port channel to a VLAN will result in
the error message: "Port <port no.> is a ghost port that belongs to a Port-Channel."
6 Device Support
Advertising