Allied Telesis AT-S63 - Manual (Page 391)

AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations 391
Interface mode, and the policy’s traffic class, which you identify with the
ID_NUMBER parameter.
Examples
This example creates a new Quality of Service policy on ports 2 and 5.
The traffic class for the policy has the ID number 12. Since policies created
with the AlliedWare Plus commands are given the same ID numbers as
their traffic classes, the policy is also assigned the ID number 12:
awplus> enable
awplus# configure terminal
awplus(config)#
interface 2,5
awplus(config-if)# service- policy input 12