Enable glc, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 437
Advertising
AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations
437
ENABLE GLC
Syntax
enable glc
Parameters
None.
Description
This command is used to enable group link control on a switch or a stack.
Example
This command enables group link control:
enable glc
AlliedWare Plus
Command
The AlliedWare Plus GROUP LINK CONTROL command automatically
activates the feature when you create the first group on a switch or a
stack. For instructions, refer to the AlliedWare Plus command in “CREATE
GLC” on page 430.
Command
Available
AlliedWare Plus
Advertising