Alliedware plus command, Table 15. port priority value increments, Own in table 15. you – Allied Telesis AT-S63 User Manual
Page 582
Chapter 31: Spanning Tree Protocol (STP) Commands
582
Section V: Spanning Tree Protocols
Description
This command is used to configure the following STP parameters settings
for port:
Port cost
Port priority
Examples
The following command sets the port cost to 15 and the port priority to 192
(increment 12) for port 6:
set stp port=6 portcost=15 portpriority=12
The following command sets the port cost to auto-detect on ports 7 to 10:
set stp port=7-10 portcost=auto
AlliedWare Plus
Command
Syntax
spanning-tree path-cost
path-cost
spanning-tree priority
priority
Mode
Port Interface mode
Description
These AlliedWare Plus commands are identical to the standard command.
Table 15. Port Priority Value Increments
Increment
Port
Priority
Increment
Port
Priority
0
0
8
128
1
16
9
144
2
32
10
160
3
48
11
176
4
64
12
192
5
80
13
208
6
96
14
224
7
112
15
240