Delete tacacsserver, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 887
AT-S63 Management Software Command Line User’s Guide
Section IX: Management Security
887
DELETE TACACSSERVER
Syntax
delete tacacsserver server|ipaddress=
ipaddress
Parameter
server or
Specifies the IP address of a TACACS+ server to be deleted
ipaddress
from the management software. The parameters are
equivalent.
Description
This command is used to remove the IP addresses of TACACS+ servers
from the switch. You can remove only one server at a time with this
command.
Example
The following command deletes the TACACS+ server with the IP address
149.245.22.20:
delete tacacsserver ipaddress=149.245.22.20
AlliedWare Plus
Command
Syntax
no tacacs-server host
ipaddress
Mode
Configure mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Example
This example removes the TACACS+ server with the IP address
152.112.12.7:
awplus> enable
awplus# configure terminal
awplus(config)# no tacacs-server host 152.112.12.7
Command
Available
AlliedWare Plus