Allied Telesis AT-S62 - Manual (Page 249)

249
Chapter 19
STP Commands
This chapter contains the following commands:
❑ ACTIVATE STP on page 250
❑ DISABLE STP on page 251
❑ ENABLE STP on page 252
❑ PURGE STP on page 253
❑ SET STP on page 254
❑ SET STP PORT on page 257
❑ SHOW STP on page 259
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S62 Management Software User’s Guide for
background information on the Spanning Tree Protocol (STP).