Allied Telesis AT-S62 - Manual (Page 64)

64
Chapter 5
Simple Network Time Protocol
(SNTP) Commands
This chapter contains the following commands:
❑ ADD SNTPSERVER PEER|IPADDRESS on page 65
❑ DELETE SNTPSERVER PEER|IPADDRESS on page 66
❑ DISABLE SNTP on page 67
❑ ENABLE SNTP on page 68
❑ PURGE SNTP on page 69
❑ SET DATE TIME on page 70
❑ SET SNTP on page 71
❑ SHOW SNTP on page 72
❑ SHOW TIME on page 73
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S62 Management Software User’s Guide for
background information on SNTP.