Allied Telesis AT-S62 - Manual (Page 74)

74
Chapter 6
SNMPv1 and SNMPv2 Community
Strings and Trap Commands
This chapter contains the following commands:
❑ ADD SNMP COMMUNITY on page 75
❑ CREATE SNMP COMMUNITY on page 77
❑ DELETE SNMP COMMUNITY on page 80
❑ DESTROY SNMP COMMUNITY on page 81
❑ DISABLE SNMP on page 82
❑ DISABLE SNMP AUTHENTICATETRAP on page 83
❑ DISABLE SNMP COMMUNITY on page 84
❑ ENABLE SNMP on page 85
❑ ENABLE SNMP AUTHENTICATETRAP on page 86
❑ ENABLE SNMP COMMUNITY on page 87
❑ SET SNMP COMMUNITY on page 88
❑ SHOW SNMP on page 90
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S62 Management Software User’s Guide for
background information on SNMP.