Allied Telesis AT-S39 - Manual (Page 127)

AT-S39 Command Line Interface User’s Guide
127
SET SWITCH VLANSTATUS
Syntax
set switch vlanstatus=enabled|disabled
Parameters
vlanstatus Specifies the switch’s mode. Specifying ENABLED
means the switch will support user-configured (port-
based and tagged) and multiple (801.Q compliant and
non-801.Q compliant) VLANs. Specifying DISABLED
means the switch will support the Basic switch mode.
The default is tagged and untagged VLANs. Only one
mode can be active on a switch at a time.
Description
This command configures a switch to support tagged VLAN switch
mode or the Basic switch mode.
Note
This command performs the same function as the command as SET
SWITCH SWITCHMODE on page 112.
Example
The following command configures the switch to support the Basic
switch mode:
set switch vlanstatus=disabled