Allied Telesis AT-S39 - Manual (Page 182)

Chapter 21: Command Reference
182
SET SWITCH CONSOLETIMER
set switch consoletimer=value
Sets the console timer.
Port Parameter Commands
SHOW SWITCH PORT
show switch port=port
Displays a port’s operating parameters, such as speed and duplex mode.
SET SWITCH PORT
set switch port=port|all
[status=forwarding|disabled]
[flowcontrol=none|transmit|recieve|both]
[bclimit=broadcastlimit]
[mdimode=mdi|mdix|auto]
[mirror=yes|no|all|none] [renegotiation=auto]
[softreset=yes|no]
[speed=autonegotiate|10mhalf|10mfull|10mhauto|
10mfauto|100mhalf|100mfull|100mhauto|100mfauto|
1000mfull|1000mfauto] [PVID=pvid]
[priority=priority] [overridepriority=yes|no]
Sets a port’s operating parameters. (You can set only one port operating
parameter at a time with this command.)
RESET SWITCH PORT
reset switch port=port
Resets a port.