Allied Telesis AT-S39 - Manual (Page 132)

Chapter 14: MAC Address Commands
132
ADD SWITCH FDB
Syntax
add switch fdb macaddress=macaddress port=port
Parameters
macaddress Specifies the static or multicast address to the added
to the switch’s MAC address table. The address can
be entered in either of the following formats:
xxxxxxxxxxxx or xx:xx:xx:xx:xx:xx
port Specifies the port to which the MAC address is to be
assigned. You can specify only one port.
Description
This command adds static and multicast MAC addresses to the switch’s
MAC address table. A MAC address added with this command is never
timed out from the MAC address table, even when the end node, or in
the case of a multicast address, the multicast application is inactive.
Examples
The following command adds the static MAC address 00:A0:D2:18:1A:11
to Port 7:
add switch fdb macaddress=00A0D2181A11 port=7
The following command adds the multicast MAC address 01:00:51:00:00
10 to Port 9:
add switch fdb macaddress=010051000010 port=9