Allied Telesis AT-S39 - Manual (Page 13)

AT-S39 Command Line User’s Guide
13
Starting a Management Session
In order to manage an AT-8000 Series switch using the command line
commands, you must first start a local, Telnet, or web management
session. All of the instructions for starting a management session are
described in the AT-S39 User’s Guide. Refer there for directions.
Once you have started a local or Telnet management session, you will
see the AT-S39 Main Menu. This menu will have the following option as
one of its selections:
C - Command Line Interface
Typing C displays the command line prompt, “$”. You are now ready to
begin to manage the switch using the command line commands.
Note
Although it has been supported in past versions, CLI via a web
browser management session is no longer supported