AMX NI-2100/3100/4100 - Manual (Page 112)

Terminal (Program Port/Telnet) Commands
104 NI Series WebConsole & Programming Guide
Terminal Commands (Cont.)
Command Description
SHOW MAX BUFFERS
Displays a list of various message queues and the maximum number
of message buffers that were ever present on the queue.
Example:
show max buffers
Thread TX RX
----------- ---- ----
Axlink 1
UDP 1
IPCon Mgr 0 (Total for TCP Connections TX=0)
Con Manager 8
Interpreter 17
Device Mgr 8
Diag Mgr 1
Msg Dispatch 0
Cfg Mgr 0
Route Mgr 0
Notify Mgr 0
---- ---- ----
Total 2 34 GrandTotal 36
See SHOW BUFFERS.
SHOW MEM Displays the memory usage for all memory types.
SHOW NOTIFY
Displays the Notify Device List (Master-Master). This is a list of
devices (up to 1000) that other systems have requested input from
and the types of information needed.
Note: The local system number is 1061.
Example:
>SHOW NOTIFY
Device Notification List of devices requested by other Systems
Device:Port System Needs
------------------------------------------------------
00128:00001 00108 Channels Commands Strings Levels
33000:00001 00108 Channels Commands
SHOW REMOTE Displays the Remote Device List (Master-Master). This is a list of the
devices this system requires input from and the types of information
needed.
If when a NetLinx Master connects to another NetLinx Master, the
newly connecting system has a device that the local system desires
input from; the new system is told what information is desired from
what device.
Note: The local system number is 1062.
Example:
>SHOW REMOTE
Device List of Remote Devices requested by this System
Device Port System Needs
------------------------------------------------------
00001 00001 00001 Channels Commands
00002 00001 00001 Channels Commands
33000 00001 00001 Channels Commands
00128 00001 00108 Channels Commands Strings Levels
33000 00001 00108 Channels Commands