AMX NI-2100/3100/4100 User Manual
Page 52
WebConsole - System Options
44
NI Series WebConsole & Programming Guide
Select the On or Off buttons to Emulate Channel ON (CHON) and Channel OFF (CHOFF)
messages for the specified <D:P:S>.
4.
Select the Push button to Emulate a push/release on the specified channel (not displayed if the
Control option is selected). Click and hold the Push button to observe how the device/Master
responds to the push message.
5.
In the Level Code section, enter a valid Level number and Level data value for the specified
<D:P:S> and press the Send button to transmit the level data.
The Level number range is 1 - 65535.
The table below lists the valid Level data types and their ranges:
FIG. 30
Select Control/Emulate from within a selected Device’s Network Settings page
Click on Control/Emulate from within
the device’s Network Settings page
to Control/Emulate that device