Nikon L810 - Manual (Page 128)

E 18
Re
fere
nce
S
ecti
o
n
3
Set the TV’s input to external video input.
• See the documentation provided with your TV for details.
4
Hold down the c button to turn on the
camera.
• The camera enters playback mode and images are
displayed on the TV.
• While connected to the TV, the camera monitor will remain
off.
B
Notes About Connecting the HDMI Cable
An HDMI cable is not included. Use a commercially available HDMI cable to connect the camera to a
TV. The output terminal on this camera is an HDMI mini connector (type C). When purchasing an
HDMI cable, be sure that the device end of the cable is an HDMI mini connector.
B
Notes About Connecting the Cable
• When connecting the cable, be sure that the camera connector is properly oriented. Do not use
force when connecting the cable to the camera. When disconnecting the cable, do not pull the
connector at an angle.
• Do not connect cables to the HDMI mini connector and to the USB connector and audio/video
output simultaneously.
B
If the Images Are Not Displayed on the TV
Be sure that the camera’s TV settings ( E61) in the setup menu matches the standard used by
your TV.
C
Using a TV Remote Control (HDMI Device Control)
The remote control of an HDMI-CEC-compatible TV can be used to control playback.
It can be used instead of the camera’s multi selector and zoom control to select images, start and
pause movie playback, switch between full-screen playback mode and 4-image thumbnail display, etc.
• Set the HDMI device control setting (
E61) of TV settings to On (default setting) and then
connect the camera and TV using an HDMI cable.
• Aim the remote control at the TV when operating it.
• Refer to the TV’s operating instructions for information about the TV’s HDMI-CEC compatibility.