Nikon L810 User Manual
Page 195
F
9
Te
chni
cal
Note
s and
In
dex
Date and time of recording
are not correct.
• If camera clock has not been set, “Date not set”
indicator flashes during shooting and movie
recording. Images and movies saved before clock is
set are dated “00/00/0000 00:00” or “01/01/2012
00:00” respectively. Set the correct time and date
from the Time zone and date option in the setup
menu.
• Check camera clock regularly against more
accurate timepieces and reset as required.
No indicators displayed in
monitor.
Hide info is selected for Photo info.
Select Show info.
Print date not available.
Time zone and date has not been set.
Date not imprinted on
images even when Print
date is enabled.
• The current shooting mode is one that does not
support Print date.
• The date cannot be imprinted on movies.
Screen for setting time zone
and date is displayed when
camera is turned on.
Clock battery is exhausted; all settings were restored
to their default values.
Camera settings reset.
Camera becomes hot.
The camera may become hot when shooting movies
or uploading images from an Eye-Fi card for an
extended period of time, or when the camera is used
in a hot area; this is not a malfunction.
–
Problem
Cause/Solution
A