Nikon L810 - Manual (Page 142)

E 32
Re
fere
nce
S
ecti
o
n
Continuous Shooting
Change settings to continuous or BSS (best shot selector).
The icon for the current setting is displayed in the monitor when the camera is in shooting
mode (
A 6). No icon is displayed when Single is selected.
Enter A (auto) mode M d button M Continuous M k button
Option Description
U Single
(default setting)
One picture is taken each time the shutter-release button is pressed.
V Continuous
Up to about four images are captured continuously at a rate of about 1.2 fps
while the shutter-release button is held all the way down (when Image
mode is set to P 4608×3456).
D BSS
(best shot
selector)
The “best shot selector” is recommended when shooting with the flash off or
the camera zoomed in, or in other situations in which inadvertent motion
can result in blurred images.
When BSS is on, the camera takes up to ten pictures while the shutter-release
button is held down. The sharpest image in the series is automatically
selected and saved.
• BSS is best suited to shooting subjects that are not moving. When
shooting moving subjects or when the composition of the picture
changes while shooting, the desired results may not be achieved.
W Multi-shot 16
Each time the shutter-release button is pressed, the
camera takes 16 shots at a rate of about 30 fps and
arranges them in a single image.
• Images are captured with the Image mode fixed
at L (image size is 2560 × 1920 pixels).
• Digital zoom cannot be used.
B
Notes About Continuous Shooting
• When Continuous, BSS, or Multi-shot 16 is selected, flash cannot be used. Focus, exposure, and
white balance are fixed at the values determined with the first image in each series.
• The frame rate with continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
• Some settings cannot be used with other functions ( A 64).