Nikon P510 - Manual (Page 123)

105
Usi
n
g GPS
Changing the GPS Settings (GPS Options Menu)
In GPS options menu, the following option settings
can be changed.
C
Displaying the Location Information of a Picture Taken during Log
Recording
You can display the shooting location of an image (latitude, longitude, and current location of the
movement being tracked for creating a log) by pressing the
w button while a picture taken during
log recording is displayed in the full-frame playback mode after storing the log data in a memory
card.
Press the
d button M z (GPS setting) tab ( A14)
Option Description A
GPS options
Record GPS data: When set to On, signals are being
received from the GPS satellite and positioning starts
(
A102). The default setting is Off.
Signals from the GPS satellite are used to set the date
and time of the camera's internal clock (only when
Record GPS data in GPS options of the GPS options
menu is set to On).
Update A-GPS file: A memory card is used to update
the A-GPS (assist GPS) file. Using the latest A-GPS file
can shorten the time needed for tracking the position
information.
E69
Create log
The measured tracking information is recorded until a
preset time set usingStart log has elapsed at the
interval set for Log interval (only when Record GPS
data in GPS options of the GPS options menu is set to
On).
• Select End log and save the recorded log data to a
memory card.
E71
View log
You can check or erase the log data stored in a memory
card by selecting Create log and then selecting End
log.
• When you select a log data and press the
k button,
the movement route is displayed.
• To erase log data, select a log data and press the l
button.
E73
View log
Create log
GPS options
GPS options menu